1-302-408-3228
Some dedicated stump grinders are over-complicated. Not the Toro STX. Its patented Toro® Dingo® TX-style control system has two simple levers that are simple to learn, master and use. Combine these easy-to-use controls with tracks and transport speeds exceeding 4 mph, and you get maximum productivity.
The Intelli-Sweep® feature automatically slows the sweep speed of the cutting head based on the load of the wheel, so heavy cutting loads won’t bog down the engine. The tracks travel easily over muddy areas, with the low center of gravity adds side hill stability for access to any job, in any condition. In addition, the hydraulically driven head means no chance of expensive belts breaking or slipping no adjusting tension - guaranteeing optimal performs time after time.
FEATURES
Track Design
• Allows for zero turn capability
• Provides a low center of gravity and large footprint
• Increased stability on side hills
• Eliminates tire ruts and flat tires
• Operates in wet & soft ground conditions.
Traction Controls
Easy-to-use control system offers smooth operation and fewer lever/nobs than conventional stump grinders. Two simple controls operate all traction and grinder functions.
1) Left/right traction control (forward, reverse, turn)
2) Sweep, lift/lower and engagement of grinder head.
Full Hydraulic Operation
• Eliminate the labor of tightening or replacing expensive poly-chain® belts or clutches
• No need to replace expensive cogged pulleys
• No worry of customers engaging grinder head at full throttle
• Eliminate shock loads to the engine by belts slipping or head stopping
Offset Cutting Head
• Provides operator with excellent visibility to stump
• Allows full rotation perpendicular to machine
Custom Trailer
Easy to load on any trailer, including Toro's custom TRX trailer with an easy-to-use, built-in securing system. No need for straps or tie-downs. Tailgate design is safer and makes it easier to load than tilt-bed trailers. Trailer features highway rated tires.
-
Cutting Depth
12.5" below grade -
Cutting Height
35" above grade -
Cutting Wheel
19" diameter to tooth; 3/4" thick, 12 green teeth -
Dimensions
34" (86.4 cm) W x 78" (198.1 cm) L x 48" (121.9 cm) H -
Engine
Kawasaki 730V Twin Cylinder -
Head Swing
47" Arc -
Hydraulic Flow
13.5 gpm hydraulic flow to head -
Weight
1200 lbs. (545 kg)
| Shipping | This item ships to |
| Delivery | Estimated between and . Will usually ship within 2 business day. |
Description
Some dedicated stump grinders are over-complicated. Not the Toro STX. Its patented Toro® Dingo® TX-style control system has two simple levers that are simple to learn, master and use. Combine these easy-to-use controls with tracks and transport speeds exceeding 4 mph, and you get maximum productivity.
The Intelli-Sweep® feature automatically slows the sweep speed of the cutting head based on the load of the wheel, so heavy cutting loads won’t bog down the engine. The tracks travel easily over muddy areas, with the low center of gravity adds side hill stability for access to any job, in any condition. In addition, the hydraulically driven head means no chance of expensive belts breaking or slipping no adjusting tension - guaranteeing optimal performs time after time.
FEATURES
Track Design
• Allows for zero turn capability
• Provides a low center of gravity and large footprint
• Increased stability on side hills
• Eliminates tire ruts and flat tires
• Operates in wet & soft ground conditions.
Traction Controls
Easy-to-use control system offers smooth operation and fewer lever/nobs than conventional stump grinders. Two simple controls operate all traction and grinder functions.
1) Left/right traction control (forward, reverse, turn)
2) Sweep, lift/lower and engagement of grinder head.
Full Hydraulic Operation
• Eliminate the labor of tightening or replacing expensive poly-chain® belts or clutches
• No need to replace expensive cogged pulleys
• No worry of customers engaging grinder head at full throttle
• Eliminate shock loads to the engine by belts slipping or head stopping
Offset Cutting Head
• Provides operator with excellent visibility to stump
• Allows full rotation perpendicular to machine
Custom Trailer
Easy to load on any trailer, including Toro's custom TRX trailer with an easy-to-use, built-in securing system. No need for straps or tie-downs. Tailgate design is safer and makes it easier to load than tilt-bed trailers. Trailer features highway rated tires.
-
Cutting Depth
12.5" below grade -
Cutting Height
35" above grade -
Cutting Wheel
19" diameter to tooth; 3/4" thick, 12 green teeth -
Dimensions
34" (86.4 cm) W x 78" (198.1 cm) L x 48" (121.9 cm) H -
Engine
Kawasaki 730V Twin Cylinder -
Head Swing
47" Arc -
Hydraulic Flow
13.5 gpm hydraulic flow to head -
Weight
1200 lbs. (545 kg)
Shipping
| Shipping | This item ships to |
| Delivery | Estimated between and . Will usually ship within 2 business day. |
Related Products
Why Choose ForestProGear?
Every product we offer is carefully selected for performance, reliability, and long-term value in the field. As an authorized dealer, we stand behind the quality of our equipment and provide expert support to help you choose the right tool for the job. From order to delivery, we're committed to helping you work the land with confidence.
Expert Support
Our team knows this equipment inside and out. We're here to answer your questions, guide your purchase, and support you long after delivery. Whether you're a landowner, contractor, or forestry professional, we’re ready to help you get the job done right.