1-302-408-3228
The Bear Cat CH4420 steps up to a road-towable format with a standard 2-inch coupler — move it between job sites or around a large property without a separate trailer. Powered by the same 13 HP Briggs & Stratton XR Professional Series engine, it handles tree limbs and prunings up to 4.5 inches wide. A cantilevered rotor design improves reliability on stringy, sappy, or wet wood that can jam lesser chippers.
Specifications
- Equipment Type: Brush Chipper (Road Towable)
- Engine: Briggs & Stratton XR Professional Series — 420cc displacement
- Horsepower: 13 HP
- Starter: Recoil
- Fuel Type: Gasoline
- Chipping Capacity: 4.5 in.
- Infeed Opening: 4.5 in. x 4.5 in.
- Hopper Capacity: 13 in. x 15 in.
- Feed System: Gravity / self-feed
- Chipper Knives: 2 reversible, heat-treated
- Disc: 14 in. diameter x 1 in. thick, 49 lbs.
- RPM: 3,000
- Drive: Double-banded belt
- Towable: Yes — 2 in. coupler standard
- Tires: ST4.8-8
- Dimensions: 75 in. L x 52 in. W x 45 in. H
- Weight: 465 lbs.
- SKU: GPE211072
Road Towable — 2 In. Coupler Standard
Unlike the hand-portable FC400, the CH4420 ships with a standard 2-inch coupler built in — hook it to a truck or tractor and move it between properties or job sites on the road. At 465 lbs. it's substantial enough to handle larger volume without sacrificing the mobility that defines this product line.
Cantilevered Rotor — Built for Difficult Material
The cantilevered rotor design is the key upgrade over entry-level chippers. Stringy, sappy, or wet wood tends to wrap around standard rotor shafts and cause jams — the cantilevered design reduces that failure point, keeping the machine running through material that would stall a basic chipper. Combined with the four-sided, adjustable striking anvil, chip quality stays consistent across different wood types and moisture levels.
3,000 RPM Cutting Speed
The oversized heat-treated chipping blades rotate at up to 3,000 RPM — fast enough to process 4.5-inch limbs cleanly without bogging down. Two reversible blades mean a fresh cutting edge is available without full blade replacement when the first edge dulls.
Ground Discharge — Standard
The ground discharge chute keeps chips low and contained, reducing mess and cleanup time compared to chippers that scatter chips widely. An optional discharge chute (GWG311759) is available for operators who want to chip directly into a dump trailer instead.
Free Shipping — No Sales Tax
Ships free to the continental United States. No sales tax on your order. Contact us before placing your order to confirm availability and arrange delivery to your location.
Description & Shipping
The Bear Cat CH4420 steps up to a road-towable format with a standard 2-inch coupler — move it between job sites or around a large property without a separate trailer. Powered by the same 13 HP Briggs & Stratton XR Professional Series engine, it handles tree limbs and prunings up to 4.5 inches wide. A cantilevered rotor design improves reliability on stringy, sappy, or wet wood that can jam lesser chippers.
Specifications
- Equipment Type: Brush Chipper (Road Towable)
- Engine: Briggs & Stratton XR Professional Series — 420cc displacement
- Horsepower: 13 HP
- Starter: Recoil
- Fuel Type: Gasoline
- Chipping Capacity: 4.5 in.
- Infeed Opening: 4.5 in. x 4.5 in.
- Hopper Capacity: 13 in. x 15 in.
- Feed System: Gravity / self-feed
- Chipper Knives: 2 reversible, heat-treated
- Disc: 14 in. diameter x 1 in. thick, 49 lbs.
- RPM: 3,000
- Drive: Double-banded belt
- Towable: Yes — 2 in. coupler standard
- Tires: ST4.8-8
- Dimensions: 75 in. L x 52 in. W x 45 in. H
- Weight: 465 lbs.
- SKU: GPE211072
Road Towable — 2 In. Coupler Standard
Unlike the hand-portable FC400, the CH4420 ships with a standard 2-inch coupler built in — hook it to a truck or tractor and move it between properties or job sites on the road. At 465 lbs. it's substantial enough to handle larger volume without sacrificing the mobility that defines this product line.
Cantilevered Rotor — Built for Difficult Material
The cantilevered rotor design is the key upgrade over entry-level chippers. Stringy, sappy, or wet wood tends to wrap around standard rotor shafts and cause jams — the cantilevered design reduces that failure point, keeping the machine running through material that would stall a basic chipper. Combined with the four-sided, adjustable striking anvil, chip quality stays consistent across different wood types and moisture levels.
3,000 RPM Cutting Speed
The oversized heat-treated chipping blades rotate at up to 3,000 RPM — fast enough to process 4.5-inch limbs cleanly without bogging down. Two reversible blades mean a fresh cutting edge is available without full blade replacement when the first edge dulls.
Ground Discharge — Standard
The ground discharge chute keeps chips low and contained, reducing mess and cleanup time compared to chippers that scatter chips widely. An optional discharge chute (GWG311759) is available for operators who want to chip directly into a dump trailer instead.
Free Shipping — No Sales Tax
Ships free to the continental United States. No sales tax on your order. Contact us before placing your order to confirm availability and arrange delivery to your location.
Bossworth FP-480FE Firewood Processor – 20-Ton Hydraulic, 15HP | Gasoline or Electric
Engine Type
Bossworth FP-480FR Firewood Processor – 20-Ton Hydraulic, 15HP | Gasoline or Electric
Engine Type
Related Products
Why Choose ForestProGear?
Every product we offer is carefully selected for performance, reliability, and long-term value in the field. As an authorized dealer, we stand behind the quality of our equipment and provide expert support to help you choose the right tool for the job. From order to delivery, we're committed to helping you work the land with confidence.
Expert Support
Our team knows this equipment inside and out. We're here to answer your questions, guide your purchase, and support you long after delivery. Whether you're a landowner, contractor, or forestry professional, we’re ready to help you get the job done right.