1-330-960-7472
The Bear Cat FC400 is a compact, hand-portable brush chipper built for homeowners with small to medium acreage. Powered by a 13 HP Briggs & Stratton XR Professional Series engine, it handles tree limbs and prunings up to 4 inches wide through a gravity self-feed hopper — no hydraulic feed system required. At 228 lbs. with 10-inch foam-filled tires, it moves around the property as easily as a wheelbarrow.
Specifications
- Equipment Type: Brush Chipper
- Engine: Briggs & Stratton XR Professional Series — 420cc displacement
- Horsepower: 13 HP
- Starter: Recoil
- Fuel Type: Gasoline
- Chipping Capacity: 4 in.
- Infeed Opening: 4.5 in. x 5.1 in.
- Hopper Capacity: 9.85 in. x 9.85 in. diamond-shaped chute
- Feed System: Gravity / self-feed
- Chipper Knives: 4 reversible, heat-treated
- Disc: 15.25 in. diameter x 0.625 in. thick, 37 lbs., factory-balanced
- Drive: 4L matched belts
- Tires: 10 in. foam-filled
- Dimensions: 42 in. L x 49 in. W x 36 in. H
- Weight: 228 lbs.
- SKU: GPE211071
Hand-Portable — No Trailer Required
At 228 lbs. with 10-inch foam-filled tires and a convenient handle, the FC400 is genuinely hand-portable — wheel it around the yard like a wheelbarrow, no separate trailer or towing setup needed. For homeowners with small acreage clearing brush, prunings, and small limbs, this eliminates the logistics overhead of a larger towable unit.
Gravity Self-Feed — Simple, Reliable Operation
Unlike hydraulic-feed commercial chippers, the FC400 uses a gravity self-feed system through a 9.85 in. x 9.85 in. diamond-shaped chute. Feed material in, gravity and the rotating disc pull it through — fewer moving parts, less to maintain, lower cost of entry. The factory-balanced rotor with four reversible heat-treated chipping blades reduces vibration and extends blade life — flip each blade to a fresh edge instead of replacing it.
Adjustable Discharge Chute
The discharge chute adjusts to direct chips into a dump trailer or truck bed, keeping cleanup minimal. For ground-level discharge instead, the optional ground discharge chute (GWG311756) keeps chips low and contained rather than scattered. An optional 2-wheel kit (GWG311755) is also available for easier hauling around larger properties.
Briggs & Stratton XR Professional Series
The XR Professional Series engine is Briggs & Stratton's commercial-duty line — built for more demanding use than standard consumer engines, with better heat management and a more robust internal build for repeated start-stop cycles typical of brush chipping sessions.
Free Shipping — No Sales Tax
Ships free to the continental United States. No sales tax on your order. Contact us before placing your order to confirm availability and arrange delivery to your location.
Description & Shipping
The Bear Cat FC400 is a compact, hand-portable brush chipper built for homeowners with small to medium acreage. Powered by a 13 HP Briggs & Stratton XR Professional Series engine, it handles tree limbs and prunings up to 4 inches wide through a gravity self-feed hopper — no hydraulic feed system required. At 228 lbs. with 10-inch foam-filled tires, it moves around the property as easily as a wheelbarrow.
Specifications
- Equipment Type: Brush Chipper
- Engine: Briggs & Stratton XR Professional Series — 420cc displacement
- Horsepower: 13 HP
- Starter: Recoil
- Fuel Type: Gasoline
- Chipping Capacity: 4 in.
- Infeed Opening: 4.5 in. x 5.1 in.
- Hopper Capacity: 9.85 in. x 9.85 in. diamond-shaped chute
- Feed System: Gravity / self-feed
- Chipper Knives: 4 reversible, heat-treated
- Disc: 15.25 in. diameter x 0.625 in. thick, 37 lbs., factory-balanced
- Drive: 4L matched belts
- Tires: 10 in. foam-filled
- Dimensions: 42 in. L x 49 in. W x 36 in. H
- Weight: 228 lbs.
- SKU: GPE211071
Hand-Portable — No Trailer Required
At 228 lbs. with 10-inch foam-filled tires and a convenient handle, the FC400 is genuinely hand-portable — wheel it around the yard like a wheelbarrow, no separate trailer or towing setup needed. For homeowners with small acreage clearing brush, prunings, and small limbs, this eliminates the logistics overhead of a larger towable unit.
Gravity Self-Feed — Simple, Reliable Operation
Unlike hydraulic-feed commercial chippers, the FC400 uses a gravity self-feed system through a 9.85 in. x 9.85 in. diamond-shaped chute. Feed material in, gravity and the rotating disc pull it through — fewer moving parts, less to maintain, lower cost of entry. The factory-balanced rotor with four reversible heat-treated chipping blades reduces vibration and extends blade life — flip each blade to a fresh edge instead of replacing it.
Adjustable Discharge Chute
The discharge chute adjusts to direct chips into a dump trailer or truck bed, keeping cleanup minimal. For ground-level discharge instead, the optional ground discharge chute (GWG311756) keeps chips low and contained rather than scattered. An optional 2-wheel kit (GWG311755) is also available for easier hauling around larger properties.
Briggs & Stratton XR Professional Series
The XR Professional Series engine is Briggs & Stratton's commercial-duty line — built for more demanding use than standard consumer engines, with better heat management and a more robust internal build for repeated start-stop cycles typical of brush chipping sessions.
Free Shipping — No Sales Tax
Ships free to the continental United States. No sales tax on your order. Contact us before placing your order to confirm availability and arrange delivery to your location.
Bossworth FP-480FE Firewood Processor – 20-Ton Hydraulic, 15HP | Gasoline or Electric
Engine Type
Bossworth FP-480FR Firewood Processor – 20-Ton Hydraulic, 15HP | Gasoline or Electric
Engine Type
Backed by Manufacturer Warranty
Every unit we sell is covered by the original manufacturer warranty, not a third-party plan. As an authorized dealer, we handle setup questions and warranty coordination directly, so you're never left dealing with the manufacturer alone.
Questions? We're Here to Help
Not sure if this is the right fit for your job, or want to double check specs before you buy? Our team knows this equipment inside and out — reach out anytime at 1-321-237-7539 and we'll help you choose with confidence.
