1-330-960-7472
The Bear Cat CH6627H is built for rentals, municipalities, and landscape companies running high-volume commercial brush clearing. A 23 HP Briggs & Stratton Vanguard engine drives an electronically-controlled hydraulic feed system through a massive 33 in. x 36 in. hopper opening — handling tree limbs, prunings, and brush up to 6 inches wide. At 1,595 lbs. with electric start, this is commercial-grade equipment built for daily heavy use.
Specifications
- Equipment Type: Brush Chipper (Road Towable, Commercial)
- Engine: Briggs & Stratton Vanguard — 627cc displacement
- Horsepower: 23 HP
- Starter: Electric
- Fuel Type: Gasoline
- Chipping Capacity: 6 in.
- Infeed Opening: 6 in. x 13 in.
- Hopper Capacity: 33 in. x 36 in.
- Feed System: Hydraulic, electronically-controlled (DDC System)
- Feed Roller Diameter: 12 in.
- Chipper Knives: 4 reversible, heat-treated
- Disc: 26 in. diameter x 1 in. thick, 165 lbs.
- Drive: Triple-banded belt
- Towable: Yes — 2 in. coupler standard
- Tires: P205-75R14
- Dimensions: 152 in. L x 60 in. W x 98 in. H
- Weight: 1,595 lbs.
- SKU: GPE211073
Electronically-Controlled Hydraulic Feed
The DDC hydraulic feed system automatically regulates feed roller speed to keep the rotor operating in its optimal RPM range — feeding faster on easy material, slowing automatically when the engine load increases on dense or oversized limbs. This prevents the engine bogging and stalling common on gravity-feed chippers when commercial crews push volume through quickly. The 12-inch feed roller pulls material through consistently regardless of operator technique.
33 In. x 36 In. Hopper — Built for Volume
The massive hopper opening accommodates large branches and brush piles without pre-cutting to size — critical for rental fleets and municipal crews where time per job directly affects profitability. The 6 in. x 13 in. infeed opening handles odd-shaped material that would need trimming on smaller chippers.
Cantilevered Rotor + Four-Sided Striking Anvil
The cantilevered rotor design resists jamming on stringy, sappy, or wet wood — a frequent failure point on standard rotor designs under commercial-volume use. The four-sided, adjustable striking anvil maintains consistent chip quality as material varies, and rotates to a fresh edge before requiring replacement. Four reversible heat-treated blades extend service intervals between full blade changes.
Built for Rental Fleets & Municipal Use
At 1,595 lbs. with electric start and a 23 HP commercial Vanguard engine, the CH6627H is designed for the duty cycle that rental companies, municipalities, and landscape contractors demand — multiple operators, multiple jobs per day, minimal downtime. An optional engine guard (GWG311761) protects the engine from chipping debris during heavy-volume operation.
Free Shipping — No Sales Tax
Ships free to the continental United States. No sales tax on your order. Contact us before placing your order to confirm availability and arrange freight delivery to your location.
Description & Shipping
The Bear Cat CH6627H is built for rentals, municipalities, and landscape companies running high-volume commercial brush clearing. A 23 HP Briggs & Stratton Vanguard engine drives an electronically-controlled hydraulic feed system through a massive 33 in. x 36 in. hopper opening — handling tree limbs, prunings, and brush up to 6 inches wide. At 1,595 lbs. with electric start, this is commercial-grade equipment built for daily heavy use.
Specifications
- Equipment Type: Brush Chipper (Road Towable, Commercial)
- Engine: Briggs & Stratton Vanguard — 627cc displacement
- Horsepower: 23 HP
- Starter: Electric
- Fuel Type: Gasoline
- Chipping Capacity: 6 in.
- Infeed Opening: 6 in. x 13 in.
- Hopper Capacity: 33 in. x 36 in.
- Feed System: Hydraulic, electronically-controlled (DDC System)
- Feed Roller Diameter: 12 in.
- Chipper Knives: 4 reversible, heat-treated
- Disc: 26 in. diameter x 1 in. thick, 165 lbs.
- Drive: Triple-banded belt
- Towable: Yes — 2 in. coupler standard
- Tires: P205-75R14
- Dimensions: 152 in. L x 60 in. W x 98 in. H
- Weight: 1,595 lbs.
- SKU: GPE211073
Electronically-Controlled Hydraulic Feed
The DDC hydraulic feed system automatically regulates feed roller speed to keep the rotor operating in its optimal RPM range — feeding faster on easy material, slowing automatically when the engine load increases on dense or oversized limbs. This prevents the engine bogging and stalling common on gravity-feed chippers when commercial crews push volume through quickly. The 12-inch feed roller pulls material through consistently regardless of operator technique.
33 In. x 36 In. Hopper — Built for Volume
The massive hopper opening accommodates large branches and brush piles without pre-cutting to size — critical for rental fleets and municipal crews where time per job directly affects profitability. The 6 in. x 13 in. infeed opening handles odd-shaped material that would need trimming on smaller chippers.
Cantilevered Rotor + Four-Sided Striking Anvil
The cantilevered rotor design resists jamming on stringy, sappy, or wet wood — a frequent failure point on standard rotor designs under commercial-volume use. The four-sided, adjustable striking anvil maintains consistent chip quality as material varies, and rotates to a fresh edge before requiring replacement. Four reversible heat-treated blades extend service intervals between full blade changes.
Built for Rental Fleets & Municipal Use
At 1,595 lbs. with electric start and a 23 HP commercial Vanguard engine, the CH6627H is designed for the duty cycle that rental companies, municipalities, and landscape contractors demand — multiple operators, multiple jobs per day, minimal downtime. An optional engine guard (GWG311761) protects the engine from chipping debris during heavy-volume operation.
Free Shipping — No Sales Tax
Ships free to the continental United States. No sales tax on your order. Contact us before placing your order to confirm availability and arrange freight delivery to your location.
Bossworth FP-480FE Firewood Processor – 20-Ton Hydraulic, 15HP | Gasoline or Electric
Engine Type
Bossworth FP-480FR Firewood Processor – 20-Ton Hydraulic, 15HP | Gasoline or Electric
Engine Type
Backed by Manufacturer Warranty
Every unit we sell is covered by the original manufacturer warranty, not a third-party plan. As an authorized dealer, we handle setup questions and warranty coordination directly, so you're never left dealing with the manufacturer alone.
Questions? We're Here to Help
Not sure if this is the right fit for your job, or want to double check specs before you buy? Our team knows this equipment inside and out — reach out anytime at 1-321-237-7539 and we'll help you choose with confidence.
